Senninger Lawn & Garden Regulators (Hose Thread)
The #1 company in commercial pressure regulators has
now introduced a lower price, hose threaded residential model.
It has a compact (3 1/2" long) body made of
high impact thermoplastic and a stainless steel
compression spring.
Preset pressure from 10-40 PSI and flow rates
from 0.1- 7 GPM makes it perfect for almost any situation.
FHT x MHT
|
|
|
PRSG10
|
10 PSI, max. inlet 80 PSI
|
| |
|
PRSG20
|
20 PSI, max. inlet 100 PSI
|
| |
|
PRSG30
|
30 PSI, max. inlet 120 PSI
|
| |
|
PRSG40
|
40 PSI, max. inlet 120 PSI
|
| |
Senninger Pressure Regulators
The heaviest duty and most reliable regulator we carry.
Senninger Regulating Limit Valve Regulators
These new regulators can operate under constant pressure.
This means that you can use a single pressure regulator for multiple zones.
This regulator must be located after the filter, since it is
designed to work with clean water.
Preset pressure from 10, 20, 30, 40 or 50 PSI and flow rates
from 0.5- 18 GPM.
These are 3/4" FPT Inlet x 3/4" FPT Outlet
|
|
|
PRLV10
|
10 PSI, max. inlet 125 PSI
|
| |
|
PRLV20
|
20 PSI, max. inlet 125 PSI
|
| |
|
PRLV30
|
30 PSI, max. inlet 125 PSI
|
| |
|
PRLV40
|
40 PSI, max. inlet 125 PSI
|
| |
|
PRLV50
|
No Longer Available
|
| |
The following are 1" FPT Inlet x 1" FPT Outlet
|
|
PR1LV30
|
30 PSI, max. inlet 125 PSI
|
| |
|
PR1LV40
|
40 PSI, max. inlet 125 PSI
|
| |
|
PR1LV50
|
No Longer Available
|
| |
|
|
|
LOW FLOW Pressure Regulators
All have flow rates of 0.1-8 GPM unless otherwise noted.
3/4" FPT x MHT for use with pipe threaded Y type filters.
|
INLET OUTLET
|
|
PRSLPH12
|
12 PSI, max. inlet 135 PSI
|
| |
|
PRSLPH20
|
20 PSI, max. inlet 150 PSI
|
| |
|
PRSLPH30
|
30 PSI, max. inlet 150 PSI
|
| |
|
PRSLPH40
|
40 PSI, max. inlet 150 PSI
|
| |
FHT x MHT for use with T
filters, inline filters or Hose-End Y filters.
|
|
|
PRSLHH12
|
12 PSI, max. inlet 135 PSI
|
| |
|
PRSLHH20
|
20 PSI, max. inlet 150 PSI
|
| |
|
PRSLHH30
|
30 PSI, max. inlet 150 PSI
|
| |
|
PRSLHH40
|
40 PSI, max. inlet 150 PSI
|
| |
3/4" FPT x 3/4" FPT for use with Y type Filters
|
|
|
PR12
|
12 PSI, max. inlet 135 PSI
|
| |
|
PR20
|
40 PSI, max. inlet 150 PSI
|
| |
|
PR30
|
30 PSI, max. inlet 150 PSI
|
| |
MEDIUM FLOW Pressure Regulators
All have flow rates of 2-20 GPM
All below are 3/4" FPT x 3/4" FPT
|
|
|
PRSMPP12
|
12 PSI, max. inlet 135 PSI
|
| |
|
PRSMPP20
|
20 PSI, max. inlet 150 PSI
|
| |
|
PRSMPP30
|
30 PSI, max. inlet 150 PSI
|
| |
|
PRSMPP40
|
40 PSI, max. inlet 150 PSI
|
| |
All below are 3/4" FPT x 3/4" MHT
|
|
|
PRSMPH12
|
12 PSI, max. inlet 135 PSI
|
| |
|
PRSMPH20
|
20 PSI, max. inlet 150 PSI
|
| |
|
PRSMPH30
|
30 PSI, max. inlet 150 PSI
|
| |
|
PRSMPH40
|
No Longer Available
|
| |
1" MEDIUM FLOW Pressure Regulators
Flow rates of 2-20 GPM
All below are 1" FPT x 1" FPT
|
|
|
PR1S12
|
12 PSI, max. inlet 135 PSI
|
| |
|
PR1S25
|
25 PSI, max. inlet 150 PSI
|
| |
|
PR1S40
|
40 PSI, max. inlet 150 PSI
|
| |
1" HIGH FLOW Pressure Regulators
Flow rates of 10-32 GPM
All below are 1 1/4" FPT x 1" FPT
|
|
PRSH10 - Sen High Flow, 10# (1 1/4inFPx1inFP)
PRSH30 - Sen High Flow, 30# (1 1/4inFPx1inFP)
|
$23.35 each
|
|
Other Pressure Regulators
Olson Low Flow Pressure Regulators
Shorter body for compact installation.
A very accurate low priced regulator.
The maximum inlet pressure is 100 PSI.
These regulators can be used before valves and timers!
For use with T filter,
Inline filter or Hose end Y filters.
FHT x MHT
|
|
| |
| |
Netafim High Flow Regulators
With any Netafim regulator you can change the pressure
at any time without disconnecting the line.
Simply remove the cap and change the spring.
Maximum inlet pressure is 120 PSI.
All below are 3/4"
MPT inlet and outlet.
Uses one spring, 5.5 - 17.6 GPM
|
|
PRNET12 - 3/4in Net Reg--12#(FPxMP) pg 42)
PRNET20 - 3/4in Net Reg--20#(FPxMP) pg 42
PRNET35 - 3/4in Net Reg--35#(FPxMP) pg 42
PRNET50 - 3/4in Net Reg--50#(FPxMP) pg 42
|
$11.00 each
|
|
Below are 1 1/2"
MPT inlet and outlet.
Uses two springs, 11 - 35 GPM
|
|
| |
| |
Below are 2" FPT inlet and outlet.
Uses four springs, 22 - 70 GPM
|
|
| |
| |
Extra Springs for Netafim Regulators
Netafim has reconfigured their spring assemblies and
in order to provide the correct part, we ask that you
call (800) 522-3747 for part numbers and pricing.
Springs are available in 9, 12, 20, 35, and 50 PSI.
|
|
| |
| |
| |
| |
| |
| |
Adjustable Regulator with Gauge
Adjust this regulator for any outlet pressure from 5 to 50 PSI.
Maximum inlet pressure is 150 PSI.
The flow rate is 5-120 GPH.
Not for commercial use.
|
|
| |
|
|
Emitters 
Checkout 
Call 
