Misters

A favorite around here, these work best between 20 and 60 PSI and produce an evenly distributed mist.   All have a threaded base that can be easily inserted into 1/2" mainline tubing or into the end of 1/4" tubing.   They can also be attached to PVC using a drill and 10/24 threaded tap.

• Note: The Press Fit versions end with PR. For example, MTFBPR is the Press Fit version of the MTFB. The Press Fit Tornado Misters are shown after the threaded versions listed below.

Press Fit misters do not go directly into your tubing. They require a MEBARB fitting, which is available either as part of the Ein Dor Support Kits or can be purchased separately.

This is a low flow, directional sprayer for misting individual plants. Use it with fuchias, azaleas, bonsai and other plants that like fog. Stakes are recommended for support and for directing the spray. Mini Misters have a 1/4" barb for attaching to the mainline poly tubing or for use at the end of 1/4" tubing.
Uses only 2.3 GPH at 20 PSI.

The Vari Mister has a built in valve to control the flow and pattern size of the spray. This makes it useful in a variety of applications. It has a maximum diameter of 36" and can be shut off when not in use. The maximum flow ranges from 4 GPH at 10 PSI to 7 1/2 GPH at 30 PSI. It has a 10/32 threaded base for use in 1/4" tubing or with a Rigid Riser.

The C-Frame Downspray sprayer is a 360° spray jet with a 45° downward trajectory. It is available in 3 flow rates.
Features include:

• Perfect for container plants
• Covers complete circle
• Quick thread base
• Designed to use at the end of 1/4" micro tubing or on a rigid riser
• Use with SEZ13, SEZ17, SV or SELB

The C-Frame Downspray sprayer sprinkler assemblies include a 12" galvanized wire stake and 36" of white feeder tube with a barb an the downspray sprinkler.

The MNELGRN is a low flow mister that can be used either for cooling or misting individual plants. One piece construction with a 1/4" barbed elbow allows more flexibility as a directional sprayer. Use it with any plants that need high humidity or in greenhouses or hothouses to reduce the temperature inside the enclosed structures.

• Diameter: 3.5 to 4 feet
• Droplet size: 50-100 microns
• Operating Pressure: 35-80 PSI

Want a quick way to get started?   Check out our Misting Kit!

These misters are great for low cost cooling systems. The water particles are larger than those from the Superfine Nozzles, but they still do an excellent job of cooling. We have them with either a 1/4" barb base (MND34B, MND1B) or a 10/32 thread base (MND34T, MND1T) (for installing directly into PVC pipe or Rigid Risers). They can be taken apart for cleaning.
 Flow rates below are at 47 PSI, diameters from a height of 6'.

Superfine Misting Nozzles are excellent misters for summer cooling! The mist put out by these nozzles is almost like smoke, so fine that the spray hardly reaches the ground. Use around a deck or pool, around the house, in a barn for cooling animals or at parties and fairs. The nozzle comes with 1/8" MPT that threads into a specially adapted 1/2" PVC tee (MNTA), or a 1/4" barbed adater (MNBA). The barbed adapter can be used at the end of 1/4" tubing or directly inserted into mainline poly tubing, if necessary.
The MNRED is a low flow mister with built-in anti-drip.
NOTE: The included filter screeens will only work with the PVC adapters.