Mazzei (Venturi type)
The Mazzei is a commercial grade injector with no moving parts.
One of its chief advantages is that it works by
suction and will draw liquid fertilizer out of almost any
container you provide.
The Mazzei can be plumbed on a bypass for less
restriction ( the preferred method), or directly into a
main water line.
It is important to choose the model size carefully;
too large and the unit will not draw the fertilizer at all,
too small and you will restrict the flow of the system.
If in doubt always choose a smaller size and put it
on a bypass assembly.
This allows you to adjust the flow through the
Mazzei and does not restrict the flow as much.
Remember, this is not as exacting as the Dosmatic.
You will need to experiment to get the dosages
required but once operating, the Mazzei is incredibly
reliable and easy to use.
All sizes have Male Pipe threads on the inlet and
outlet, which are easily adapted to hose threads.
Mazzei Flow Chart (Venturi style)
| Mazzei Unit |
Minimum Flow at 50 PSI Inlet |
Fertilizer Draw with outlet pressure at |
| 30 PSI |
10 PSI |
| 1/2" Very Low (#283) - IM12VLF |
30 GPH |
2 GPH |
6 GPH |
| 1/2" Low (#287) - IM12L |
60 GPH |
3 GPH |
8 GPH |
| 1/2" High (#384) - IM12H |
150 GPH |
10 GPH |
14 GPH |
| 3/4" Low (#484A) - IM34L |
240 GPH |
12 GPH |
17 GPH |
| 3/4" High (#584) - IM34H |
425 GPH |
21 GPH |
25 GPH |
| 1" Low (#878) - IM1L |
750 GPH |
56 GPH |
75 GPH |
| 1" (#1078) - IM1 |
1050 GPH |
86 GPH |
92 GPH |
Flow Range at 20-60 PSI with 50% Pressure Differential
|

Mazzei Injector
|
|
IM12VLF
|
1/2in Very Low Flow Injector (#283)
|
| |
|
IM12L
|
1/2in Low Flow Injector (#287)
|
| |
|
IM12BPL
|
1/2in Low Flow Bypass Assembly
|
| |
|
IM12H
|
1/2in High Flow Injector (#384)
|
| |
|
IM12BPH
|
1/2in High Flow Bypass Assembly
|
| |
|
IM34SA
|
3/4in Suction Assembly (same as 1/2in)
|
| |
|
IM12MVLV
|
1/2in Metering Valve
|
| |
3/4" INJECTORS AND ACCESSORIES
|

Bypass Assembly

Suction Assembly
|
|
IM34L
|
3/4in Low Flow Injector (#484)
|
| |
|
IM34H
|
3/4in High Flow Injector (#584)
|
| |
|
IM34BP
|
3/4in Bypass Assembly (either flow)
|
| |
|
IM34SA
|
3/4in Suction Assembly (same as 1/2in)
|
| |
|
IM34BYPSK
|
3/4in Bypass and Suction Kit
|
| |
1" INJECTORS AND ACCESSORIES
|

Bypass & Suction Kit
|
|
IM1L
|
1in Low Flow Injector (#878)
|
| |
| |
|
IM1BP
|
1in Bypass Assembly
|
| |
|
IM1SA
|
1in Suction Assembly
|
| |
|
IM1BYPSK
|
1in Bypass and Suction Kit
|
| |
1 1/2" and 2" INJECTORS
|
|
|
IM112
|
1 1/2in Low Flow Injector (#1583)
|
| |
|
IM2
|
2in Low Flow Injector(#2081)
|
| |
Mazzei Rebuild Kits
New!
These kits allow you to rebuild a Mazzei fertilizer injector.
Each kit includes a spring, a ball and a seal.
Kits are available for:
- 1/2" Low Flow (IM12KIT) for models #283, #287
- 1/2" High Flow and all 3/4" (IM34KIT) for models #384, #484, #584
- all 1" (IM1KIT) for models #878, #1078
|
|
|
IM12KIT
|
1/2in Kit for models #283, #287
|
| |
|
IM34KIT
|
3/4in Kit for models #384, #484, #584
|
| |
|
IM1KIT
|
1in Kit for models #878, #1078
|
| |
|
|