Water Magnets can be used to help reduce mineral buildup in your home or garden.
|
|
| |
MAG1
|
MAG3
|
Magnetic water conditioning sets can help your drip irrigation
system by changing the molecular structure of water as it passes
through a magnetic field.
These units suspend
lime/calcium so that it no longer attaches to the walls of pipes
or to drip emitters.
They even remove existing deposits which
then get flushed out of the system. An added
benefit is that the minerals will then be available for your plants
to utilize for healthy growth.
For home use, the MAG2 unit is comprised of two sets of magnets;
one installed on the cold water line where it enters the home and
the second on the output pipe of the hot
water tank.
The magnets can work on PVC or copper water lines (they do not work on galvanized).
These magnet units will help reduce mineral buildup
on pipes and increase the efficiency of hot water heaters
and other water appliances.
Toilet and tub stains are drastically reduced.
Existing scale in your water heater and plumbing system is magnetically
dissolved in the water.
The result is an appreciable savings in energy and money.
We can provide relief from your hard water problems.
Magnetically treated water has been used in Europe and Asia for many years.
In the past 10 years this “new” idea has become widespread in the United States.
It requires no pipe cutting, electricity or maintenance and lasts virtually forever.
Just place the units over the pipe and attach with the included plastic ties.
Minerals in the earth are naturally dissolved and transmitted by water into
your plumbing system.
As the mineral particles scrape along the inside surface of the water pipes, they
are slowed down sufficiently to fall out of suspension, re-crystallize
and re-form into hard rock scale on the pipe walls.
When water is magnetically charged, it electrically takes on a
greater ionic charge than the minerals, which creates a natural magnetic attraction between the two.
The magnetization then attracts and locks the dissolved minerals into
the water creating healthy and cost-free de-scaling.
Magnetic water conditioning solves the problems that softening is
designed to solve, but without adding salts.
This can result in better tasting water as there is an actual
reduction in the size of the water molecules.
The small, magnetized water molecules have a greater solvency
and a magnetic attraction that results in cleaner bathing and
washing, and dramatically reduces the gases and foul taste
of sulfur, chlorine, fluoride, etc.
Calcium deposits in spigots, shower heads and toilets will
soften and dissolve.
Water spotting is reduced on glass and tile.
The MAGNETIZER must be installed for a period of 90 days to
allow time to solve each unique hard water situation.
|
|
MAG1
|
Drip System, 1/2 - 1in Pipe, 10 GPM, 7200 Gauss
|
| |
|
MAG2
|
Whole House, 1/2 - 1in pipe, 12 GPM, 7200 Gauss (2 sets)
|
| |
|
MAG3
|
Ag/Industrial, 1 inch Pipe, 25 GPM, 11,200 Gauss
|
| |
|
MAG4
|
Ag/Industrial, 2 inch Pipe, 140 GPM, 11,200 Gauss
|
| |
|
MAG5
|
Ag/Industrial, 3 inch Pipe, 400 GPM, 11,200 Gauss
|
| |
|
|
Kits 
Checkout