Adjustable Sprayers
 Catalog Page 16, 17

The Shrubblers® emit 8 fingers of water that can be adjusted from a basic drip up to a 18" diameter circular pattern.   This covers the root zone and helps to water in fertilizers and nutrients.   They are adaptable to different sizes of plants and changing water needs as the plants grow, and can be individually shut off with a simple twist of the cap.   They do not need pressure regulators unless pressure is over 50 PSI, and require minimum filtration.   The DSHS, DSHB and DSHT full circle style has 8 evenly spaced outlets while the DSHS180 and DSHB180 half circle Shrubblers have 5 outlets.  We recommend a maximum diameter of 15".

Used in our Rose Kit.

Use this emitter for delivering large quantities of water to a small area (i.e. filling a basin or moat around a plant).   The flow varies from 0-35 GPH with a twist of the cap.

This adjustable umbrella patterned sprayer is one of our best sellers.   When planting young trees or larger perennials the wetting area can be turned down.   As the plants grow, the Spectrum™ spray pattern can be enlarged up to 5 1/2 feet in diameter.   There are no moving parts to be damaged and the top can be easily removed for cleaning.   The Spectrum™ on a stake comes with a break off transfer barb.   All Spectrums™ have a full circle pattern.

Flexible like the Spectrum™, but available in full, half or quarter circle pattern with an easy to adjust valve on the side.   The full circle Vari-Jet™ has 18 fingers of water, the half and quarter circle patterns are fan sprays.   The maximum flow for all Vari-Jets™ at 30 PSI is about 30 GPH.   All Vari-Jets™ have a 10/32 threaded base which can be inserted into 1/4" tubing, Rigid Risers, Pop Up Risers or directly into 1/4" mainline.

If you like the results of a sprayer on a stake but don't like having to look at it all the time, the Pop Up riser is perfect.   It also works well in areas where damage is likely, such as border strips or commercial landscaping.   The riser will extend to a height of 9" and requires only 15 PSI to operate.   50 PSI is the maximum operating pressure.
Any 10/32 threaded base sprayer or jet can be installed in the riser.   The unit is fed at the base with standard 1/4" polyethylene tubing.   The top of the riser must be installed 1" above soil level.   There is a protective housing option to protect the spray head when not in the extended position.